Furniture Finish Types: How to Choose and Match Them

Furniture finishes fall into two families: penetrating finishes (oils) that soak into the wood, and surface finishes (varnish, polyurethane, lacquer, shellac, paint) that form a protective film on top. Penetrating finishes look natural and are easy to touch up. Surface finishes protect better against spills and wear. Once you know which one your piece has, you can care for it correctly, and match everything around it, including the risers under its legs, to its color and sheen.
TL;DR
- Two families: penetrating finishes (oils, penetrating resins) and surface finishes (varnish, polyurethane, lacquer, shellac, wax, paint).
- For tables, desks and other hard-use pieces, polyurethane is widely considered the most durable indoor option. Oil suits low-wear pieces you are happy to recoat.
- Shellac and wax look beautiful but handle water, heat and wear poorly, so they suit pieces that get gentle use.
- Finish also decides color and sheen: water-based products stay clearer, most others add a yellow-to-orange tone.
- When you lift a piece, match the risers to its finish. We make risers in wood tones, solid colors, metallic finishes and a wood grain texture.
Table of Contents
- The two families of furniture finishes
- Furniture finish types, one by one
- Which finish is the most durable?
- How to choose a finish for the way you live
- Caring for a finished piece
- Matching risers to your furniture’s finish
- We build risers around your finish
- Our view on finishes and risers
- FAQ
- Sources
The two families of furniture finishes
Every guide you will read slices the topic a little differently, but they agree on the main split. The Spruce divides wood finishes into penetrating and surface types: tung oil, linseed oil and cedar oil on one side, varnish, polyurethane and paint on the other. A university extension guide from Utah State University uses the same split and adds that penetrating finishes become part of the wood instead of building up on it.
That difference explains most of what you notice in daily life:
- Penetrating finishes leave the surface feeling like wood, with little sheen. Small dents or scratches can be patched by rubbing in more finish with steel wool, according to the same Utah State guide.
- Surface finishes sit on top like a shield. They resist moisture better because, as finishing authority Bob Flexner explains in Popular Woodworking, the thicker the film, the more moisture-resistant it is.
How Stuff Works lists six basic furniture finishes: varnish, penetrating resin, shellac, lacquer, wax and oil. Paint, stain and dye are usually added to that list, since they change color rather than just protect. Here is each one in plain terms.
Furniture finish types, one by one
Oil (linseed, tung, Danish)
Oil soaks in and gives wood a warm, satiny, low-sheen look that keeps the grain front and center. Utah State’s guide calls tung oil the most durable of the natural oils, resistant to water, acid, alkali and mildew. Each added coat darkens the wood and deepens the grain, especially in hardwoods.

The tradeoff is thickness. Flexner notes that boiled linseed oil, 100% tung oil and wax dry soft and cannot build a meaningful film, so their protection is limited. Oil fits bedroom pieces, decorative items and anything you will happily recoat when it looks dry.
Wax
Paste wax gives a soft glow and is easy to apply and repair. Utah State notes it protects against scuffing and staining but will not stand up to heavy wear or water. The American Hardwood Information Center rates it excellent for repairability but poor for water, scratch and chemical resistance. Think of wax as a finishing touch or a light-use finish.
Shellac
Shellac is a traditional finish that dries fast and adds a warm amber tone. It is also sensitive. Bob Vila’s guide explains that water stains it and alcohol dissolves it, so a glass left sweating on the surface can leave a lasting mark. It suits formal, lightly used furniture rather than a coffee table.
Lacquer
Lacquer dries fast to a hard, clear film and is a favorite for crisp, showroom-style case goods such as dressers and cabinets. In durability comparisons, Jeff Jewitt writes in Fine Woodworking that among evaporative finishes, lacquers fare best for overall durability. The American Hardwood Information Center rates nitrocellulose lacquer good for water and chemical resistance but only fair for scratch resistance.
Varnish
Varnish is a hard, clear film made from resin and oil, sold in gloss, satin and flat sheens. Bob Vila’s guide separates varnishes by oil content: long-oil for boats, medium-oil for floors, and short-oil for hard, brittle furniture finishes. It holds up well to wear and needs overnight drying.
Polyurethane
Polyurethane is a synthetic varnish. Woodsmith recommends it for high-use furniture such as kitchen tables, dining tables and coffee tables, because it forms a tough film with strong resistance to moisture, heat and scratches. A heavy build can look thick and plastic-like, and slow drying makes dust control matter.
Two versions exist. Flexner points out that oil-based polyurethane keeps darkening as it ages, while water-based polyurethane does not.
Water-based finishes
Water-based finishes add little color, so they keep pale woods like maple and birch looking pale. The American Hardwood Information Center rates most as good for water, chemical and scratch resistance but poor for repairability. They are a good fit when you want a clear, modern look.
Stain and dye
Stain and dye change color; they do not protect on their own. You apply a protective finish over them. Flexner observes that a finish has more decorative impact on darker woods like cherry and walnut than on light woods.
Paint
Paint is the one finish that gives you any color you want, including bright white. The USDA Forest Service’s Wood Handbook says paints give the most protection of all finishes and the widest color selection. It also notes that latex (acrylic) paints keep their gloss better than oil-based paints, which tend to lose gloss within a year or two.
Epoxy
Epoxy forms a thick, glassy coating. It appears on river tables, bar tops and heavy-duty surfaces where a deep, hard layer is the goal.
Which finish is the most durable?
It depends on what “durable” means, because finishes trade one strength for another. Jeff Jewitt describes the core tradeoff: evaporative finishes (wax, shellac, lacquer, some water-based) scratch easily but rub out and repair well, while reactive finishes cure by chemical change, are much harder to repair and are far more durable.
For everyday indoor furniture, polyurethane is the usual answer. On the American Hardwood Information Center’s scoring, catalyzed polyurethane tops the durability table and is recommended for floors, stairs and high-impact areas, though it is slow-drying and very hard to repair. Synthetic penetrating oil scores far lower and needs refreshing from time to time.
| Finish | Look | Wear and water resistance | Upkeep and repair |
|---|---|---|---|
| Oil | Satiny, natural, low sheen | Limited | Recoat when dry; easy spot repair |
| Wax | Soft glow | Poor | Rewax; easy to repair |
| Shellac | Warm amber | Poor against water, alcohol, heat | Easy to repair |
| Lacquer | Crisp, clear, glossy | Good water resistance, fair scratch resistance | Rubs out well |
| Varnish | Gloss, satin or flat | High | Harder to repair |
| Polyurethane | Clear, satin to gloss | Very high | Hard to repair |
| Water-based | Clearest, little color | Good | Poor repairability |
| Paint | Any color | High protection | Repaint |
How to choose a finish for the way you live
Woodsmith suggests judging any finish on appearance, ease of application and protection matched to how the piece will be used. In practice:
- Desks, dining tables, coffee tables: polyurethane or varnish. These surfaces get moisture, heat and constant handling.
- Dressers, cabinets, bedroom furniture: lacquer, oil or water-based finish, depending on the look you want.
- Pale woods you want to keep pale: water-based finish, since most other products add a yellow-to-orange tint.
- Oak, walnut, cherry you want to look rich: oil-based finishes, which deepen color. A yellowish tone can even enhance the character of oaks.
- Anything you want to touch up yourself: oil, wax or shellac, because they repair easily.
One more point from the American Hardwood Information Center: wood moves with humidity and temperature, so finishes that are or become too brittle are not recommended.
Caring for a finished piece
Care depends on the family. A thin wiped-on oil finish needs more maintenance than any other finish except wax: recoat whenever it looks dry or worn. If you use paste wax over another finish, remove it with mineral spirits before recoating, or the new coat can cure softer.
For film finishes, the job is mostly protection and gentle cleaning. Coasters, trivets and prompt wipe-ups do more than any product. A regular home cleaning routine that avoids harsh solvents near shellac and wax keeps those softer finishes looking right. If you are applying a new coat yourself, Utah State advises controlling dust, applying on a clear, dry day around 70°F, brushing with the grain, and sanding lightly between coats. Follow the product label for drying times and ventilation.

Matching risers to your furniture’s finish
The finish question comes up again when you raise a piece. A bed, sofa, desk or chair that sits too low is hard on your back and knees, and the fix is a riser under each leg. The riser then becomes part of the look, and a mismatched color or sheen shows.
Here is how we match risers to common finishes:
- Stained or oiled wood: pick a wood tone, and add the wood grain texture so the riser reads as part of the leg. The wood grain texture is $5.00 one-off per riser.
- Painted furniture, such as white or black legs: a solid color riser blends in. Our colored risers are priced the same whatever the color.
- Brass, steel or other metal accents: metallic risers carry the finish down to the floor. Our brass furniture legs are another option when you want the whole leg to be metallic.
- Tapered or mid-century legs: the configurator accepts dimensions down to the hundredth of an inch and supports round, angled and irregular legs. Our guide to risers for tapered and mid-century legs shows how to get a snug fit.
If the piece sits on hardwood floors, our guide on protecting hardwood floors with furniture risers covers the floor side of the finish question.
The approach differs by room. For a living room, the couch and sofa risers and table risers matter most, since a sofa and coffee table are usually seen together. Our coffee table height guide helps you get that relationship right. For a home office, desk risers and chair risers bring the working height up so you bend less. In a small apartment, bed risers add height, and the space beneath can serve as hidden storage.
We build risers around your finish
Every riser we make is built to order from your measurements. In the configurator you choose wood tones, solid colors, metallic finishes or wood grain texture, and the cost updates as you pick options. For heavier pieces, extra stability is $5.00 one-off per riser, and our heavy duty furniture risers are made for higher loads.
Start in the configurator, enter your leg dimensions, and choose the finish that matches your piece.

Our view on finishes and risers
Most people choose a finish once, when they buy the piece, and never think about it again. Then they raise the furniture and the legs they added look like an afterthought.
We think a riser should disappear into the piece. That is why we offer wood tones, solid colors, metallic finishes and wood grain texture, and why you set every dimension yourself, down to the hundredth of an inch. A standard riser only comes in preset sizes. A custom one can follow your leg, whether it is round, angled or irregular, and match your finish.
Our advice: identify your finish first. Oiled wood wants a wood tone and grain. Painted legs want a solid color. Brass or steel accents want a metallic finish. Then size the riser to the leg and the height you need. The piece keeps its character, and you get the height your back and knees need.
Harris
FAQ
What are the four main types of wood finishes?
A practical grouping is oil, varnish (including polyurethane), shellac and lacquer. Many guides add wax, water-based finishes, stain and paint. Popular Woodworking lists oil, oil-based varnish, water-based finish, shellac and lacquer as common families, plus two-part high-performance finishes used in industry.
What is the most durable finish for furniture?
For indoor furniture, polyurethane is the most durable option in The Spruce’s comparison. It resists scratches, abrasion and water. The tradeoff is that it is harder to repair than softer finishes.
Is oil or polyurethane better for a table?
Polyurethane suits tables that get daily use, since it resists moisture, heat and scratches. Oil gives a more natural, low-sheen feel and is easy to refresh, so it fits tables that see lighter use and where you do not mind recoating.
How do I find out what finish my furniture has?
Look at the surface. A low-sheen, natural feel usually means oil or wax. A clear hard layer on top suggests varnish, polyurethane or lacquer. An opaque, colored surface is paint. If you are unsure, ask the maker or seller of the piece, or compare the color and sheen against samples.
Can risers match any furniture finish?
Our risers come in wood tones, solid colors, metallic finishes and a wood grain texture, so you can match most common finishes. Pick the option closest to your legs in the configurator.
Sources
- How to Choose the Right Wood Finish, The Spruce
- Finishing, Utah State University Extension
- Wood Finishing Basics, Popular Woodworking
- Wood Handbook, Chapter 15, Finishing of Wood, USDA Forest Service
- Wood Finishes, Bob Vila
- Best Wood Finish, Woodsmith
- Selecting a Finish, Fine Woodworking
- Comparison of Finish Products, American Hardwood Information Center
- Selecting a Finishing System, American Hardwood Information Center
- How to Choose a Furniture Finish, HowStuffWorks