Riserman logoRiserman
Back to blog

How to Add Storage Under a Sofa With Custom Risers

Isometric platform creates space for hidden sofa storage

The simplest way to add storage under a sofa is to lift the sofa. Most couches sit only a few inches off the floor, which is too little for a useful bin. Risers cut to the exact size of your sofa’s legs raise it by the amount you choose, so the dead space underneath becomes a bin-sized storage bay. That works without drilling, rebuilding or replacing the sofa you already own.

This guide shows how to measure, how much lift you need, which bins fit, and how to keep the result stable, clean and good-looking.

Riserman
riserman.com
Make Room for Sofa Storage
RiserMan makes custom 3D-printed risers to your measurements, helping lift your sofa and create space for storage underneath.
Visit

TL;DR

Table of Contents

Why raising the sofa beats squeezing bins underneath

Many sofas have 4 to 6 inches of clearance between the floor and the lowest rail. Some have less. A bin has a lid, handle or wheels on top of its listed height, and the sofa’s frame, center supports and dust cover eat into the opening. So the usable space is often smaller than it looks.

You have two choices: shop for ever-flatter containers, or add height. Adding height is more flexible, because it lets you choose the bins that suit what you store rather than what happens to slide under. Even a modest lift matters. Food52’s small-apartment advice notes that risers add about 2 inches of clearance under a couch, which is enough to turn a gap into a storage bay.

The lift also helps the people who use the sofa. A higher seat can make it easier to stand up. We cover that in our guide on couch risers for seniors. If your sofa sits too low in general, our piece on how to raise sofa height walks through the options. Storage and easier standing come from the same change.

Why raising the sofa beats squeezing bins underneath

Step 1: Measure the real clearance

Measure before you decide on anything. The mistake that sends bins back is measuring once, at the front, where the gap is usually the largest.

  1. Measure floor to the lowest obstruction at three points. The Good Home Doc advises measuring at the front, middle and back, because a front rail can hide a lower center support, a recliner mechanism, a sleeper frame, a cable or a sagging dust cover. Use the smallest number.
  2. Account for the floor surface. Habitatista’s under-couch guide says to measure to the top of the rug fibers if the sofa sits on a rug.
  3. Record usable width and depth between the legs and supports. Center legs or braces can block a container even when the side opening is wide enough, as Homespe’s buying guide warns.
  4. Check the pull-out path in front of the sofa. Habitatista suggests looking for coffee tables or narrow walkways that would block a drawer from sliding out.

Write down the smallest height, the narrowest width and the shallowest depth. Those three numbers decide everything that follows.

While you have the tape out, you may be thinking about how the whole sofa looks once it is lifted. If you plan to refresh it at the same time, sizing cushion covers for sofas follows the same measure-twice habit.

Step 2: Work out how much lift you need

Start from the bin, not from the riser. Decide what you want to store, pick a bin height, then subtract the clearance you already have.

The rule of thumb in Hideing’s guide to under-furniture space: the bin should be at least ½ inch shorter than the smallest clearance, counting its lid, handle or wheels. For width and depth, make it at least 1 inch smaller in both directions. Habitatista suggests a quarter-inch buffer above the container’s listed exterior height as a minimum.

A worked example. Your sofa has 4 inches of clearance at its lowest point. You want bins that are 6 inches tall including wheels.

A stock 2-inch riser would leave you 0.5 inch short, and the bin would jam. A riser built to 2.5 inches fits. This is exactly where height specified to the hundredth of an inch pays off: you buy the lift your bins need rather than the nearest preset size.

Two more points. First, remember that interior dimensions decide what you can store and exterior dimensions decide whether the bin fits. Homespe gives the example that a 7.5-inch-high unit cannot slide under a frame with only 7 inches of usable clearance. Second, a taller lift gives you more storage, but it also changes how the sofa looks and feels, so sit on the sofa at the new height if you can before committing to a big jump.

Step 3: Get risers that match your legs and your load

This is where most standard risers fall short. Preset risers come in fixed heights and fixed cup shapes, designed for round or square feet. Sofa legs are rarely that cooperative: they can be tapered, angled, splayed, round, square or an irregular carved shape.

RiserMan builds couch and sofa risers to the measurements you enter, supporting round, angled, irregular and standard legs. In the configurator the cost updates live as you choose options, so you see what a taller lift or a different finish does to the total before you order.

Match the riser to the weight

A sofa with people on it carries far more than its own weight. Hideing’s guide points out that the sofa’s rating, the rating of its legs or casters and the rating of the storage bin are separate load limits. Do not exceed any of them or try to offset one against another. For a large sectional, a sleeper sofa or a sofa that regularly seats several people, choose the reinforced option. We offer an extra stability add-on at $5.00 each, one-time, and a dedicated page for heavy-duty furniture risers.

Choose the finish so the sofa looks intentional

A lifted sofa shows more of its legs and more of the riser. A finish that blends with the legs makes the lift disappear. Options include wood tones, solid colors, metallic finishes and a wood grain texture at $5.00 each, one-time.

Step 4: Choose bins that fit and protect the floor

With the clearance settled, pick containers. Think about how often you reach for the contents.

Bin type Good for Watch for
Rigid drawers on wheels Items you grab weekly: remotes, games, chargers Wheels that scratch hard floors
Shallow lidded containers Seasonal linens, throws, pillow covers Lid height counts toward the total
Soft fabric bins Light items such as blankets They sag when overloaded

The drawer-on-wheels idea comes from Livingetc’s under-sofa storage advice, which quotes a professional organizer recommending wheeled drawers for easy access and a designer recommending shallow lidded containers that slide in easily, especially under skirted sofas.

Protect the floor

Habitatista notes that hardwood, engineered laminate and vinyl floors can be scratched by rough plastic ridges or metal casters. Look for soft felt pads, rubber-coated wheels or smooth fabric bottoms. On thick carpet, wider casters stop the bin from sinking into the pile.

Skirted sofas and cords

If your sofa has a fabric skirt, a taller lift gives you room to tuck bins behind it without the fabric catching. Keep cords, vents and any service access clear, as Hideing advises, and choose a finished bin with smooth, non-sharp edges so nothing snags your sofa’s dust cover.

Storage bin tucked behind a lifted sofa skirt

Step 5: Decide what goes underneath

Under-sofa space works best for light, flat or soft items. SofaTopics lists throws, pillow covers, remotes, magazines, children’s toys, gaming accessories and seasonal linens as good fits, and recommends avoiding heavy, sharp or damp items.

Some practical groupings that work in apartments:

Store things that are dry. Hideing cites the U.S. EPA’s recommendation of keeping indoor relative humidity below 60% to reduce mold risk, so avoid putting anything damp or prone to musty smells in a closed container under a sofa. Clear bins help too: Business Insider’s small-space guide says seeing what is stored makes a small space feel less chaotic.

Declutter first. The Home Picker makes the point that the cheapest storage is owning less, and it lists filling dead space under beds and sofas with low bins as one of the quickest ways to claim unused room.

Keep it tidy and clean

The space under a sofa collects dust. Martha Stewart’s dusting guide quotes a cleaning professional saying the areas under a bed or couch are neglected dust hotspots that should be vacuumed more often with a crevice tool. Raising the sofa makes this easier: a bigger gap gives the vacuum nozzle room to reach, and the bins slide out of the way.

A routine that takes five minutes:

  1. Pull the bins out.
  2. Vacuum the floor and the sofa’s underside with a crevice tool.
  3. Wipe the bin bottoms and check the felt pads or wheels.
  4. Slide the bins back in.

Visible items can affect the look of a whole room. Livingetc quotes an organizer noting that under-sofa storage is limited by the height and weight of the containers you choose and that what shows can change a room’s aesthetic. A tidy matching set of bins, and risers in a finish that echoes your legs, keep it looking planned.

What about renting?

Risers are a good fit for apartment dwellers because the change is reversible. Nothing is screwed into the floor or the wall, and the sofa goes back to its original height when you move. Check your lease for any rule on floor protection, and use felt pads under the risers on hard floors.

If you also want more storage in the bedroom, the same method works under a bed. Our guide to bed risers for under-bed storage explains how much lift you really need, and our bed risers are built the same way: to your leg size.

Our view on lifting a sofa for storage

We think the best storage is the kind you do not have to buy furniture to get. Most sofas already have the space; they just lack a few inches of height.

That is why we build risers to the measurement you give us, down to the hundredth of an inch. A bin does not care that a preset riser is nearly the right height. Nearly is the difference between a drawer that glides out and one that jams.

Legs are the other half of it. Round, angled and irregular legs are common on sofas, and a riser that does not hold them squarely is not worth having under a seat people sit on every day. So we make the shape fit the leg, and we offer extra stability for heavier loads.

Choose your bin, measure your clearance, enter the numbers, and watch the price update as you go. The storage bay is yours to size.

Harris

Get risers cut to your sofa

If you have your clearance, your leg shape and your bin height, you have everything you need. Our couch and sofa risers are made to order from the dimensions you enter in the configurator, in your choice of finish, with the cost updating as you pick each option. Add wood grain texture ($5.00 each, one-time) or extra stability ($5.00 each, one-time) where you want them.

Riserman

Start on the Riserman home page or go straight to the couch risers page and enter your numbers.

FAQ

How much space do I need under my sofa for storage?

It depends on the bin. Take the bin’s full height, including lid, handle or wheels, and add at least ½ inch of margin. Subtract the sofa’s smallest clearance, and the result is the lift you need. A 6-inch bin under a sofa with 4 inches of clearance needs about 2.5 inches of lift.

Can sofa risers hold a heavy sofa?

They can when sized to the legs and the load. A sofa, its legs and the bins each have their own load limit, and none should be exceeded. For heavy sectionals or sleeper sofas, we offer an extra stability option at $5.00 each, one-time, and a dedicated heavy-duty risers page.

What can I safely store under a sofa?

Light, flat or soft items: throws, pillow covers, remotes, magazines, toys and seasonal linens. Avoid heavy, sharp or damp things. Keep indoor humidity below 60%, as the EPA recommends, to reduce mold risk in closed containers.

Will wheeled bins scratch my floor?

Hard floors such as hardwood, laminate and vinyl can be scratched by rough plastic or metal casters. Choose bins with felt pads, rubber-coated wheels or smooth fabric bottoms. On thick carpet, wider wheels keep the bin from sinking.

Sources