Chair Risers for Tall People

Most chairs are designed for average height. If you're tall, your knees end up higher than your hips, which gets uncomfortable fast. Risers are a simple fix.

Find your seat height

Sit with feet flat. Your thighs should be about level and your knees bent close to 90 degrees. Measure from the floor to the back of your knee; your ideal seat height is close to that number.

Work out the lift

Subtract the current seat height from your ideal height. For most tall people that's 1 to 2 inches. Then check the table: you still want about 10 to 12 inches between the seat and the underside of the tabletop so your legs fit.

Fit the chair legs

Measure the bottom of each leg; front and back legs often differ. Leave about 1/4 inch of clearance. Custom pockets keep chairs from slipping when you lean back.

Office and kitchen chairs too

Four-legged office, kitchen and accent chairs work the same way. Rolling chairs with a star base usually need a different solution.

Common questions

Will a taller chair still fit under my table?

Check the seat-to-table gap. If it drops below about 10 inches, raise the table too.

Can I raise just my chair and not the family's?

Yes, order one set for your chair.

Can I get help with sizing?

Yes. Use the chat on any page or text 860-856-3633 with a photo of the leg next to a tape measure, and we'll help you pick the right size before you order.

Ready to order?

Build your custom chair risers: enter your leg size and height, and see the price as you go.